Mindray iPM-9800, Руководство оператора

Страница: 77 / 300

7-11
7.10 Using Care Group Alarms
7.10.1 Care Group Auto Alarms
When auto alarm is set on for viewing other patient and a Care Group is set up on your
monitor, a flashing symbol will appear beside the QuickKeys area if any monitor in your
Care Group, which is not currently viewed by your monitor, is alarming. The alarm symbol
is shown as below.
The department and bed label of the alarming monitor appear on the symbol. You can enter
the view other patient window by pressing this symbol.
To switch auto alarm on or off for viewing other patient:
1. Select [
Screen Layout >>
] in the main menu. Then, select [
Others
] and [
Ok
] from the
popup menu.
2. In the view other patient window, select the care group setup button. Then, select
[
Auto Alarm
] and toggle between [
On
] and [
Off
].
7.10.2 Viewing Alarm Information
You can view the alarm information from the currently viewed bed by selecting the message
area in the view other patient window.
The Care Group overview bar locates at the bottom of the View Other Patient window. In
the overview bar, the department and bed label for any Care Group beds are displayed. The
colour in which a Care Group bed appears matches its status. For details, refer to the
Viewing Other Patients
chapter. You can view the alarm information from other Care Group
bed by selecting the department and bed label key in the Care Group Overview Bar.