Mindray iPM-9800, Руководство оператора

Страница: 153 / 300

16-7
16.3.5 Setting the Apnea Alarm Delay
In the [
CO
2
Setup
] menu, select [
Adjust CO
2
Limits >>
] → [
Apnea Time
] and then select
the appropriate setting. The monitor will alarm if the patient has stopped breathing for longer
than the preset apnea time.
16.3.6 Choosing a Time Interval for Peak-Picking
For microstream and mainstream CO
2
modules, you can select a time interval for picking the
highest CO
2
as the EtCO
2
and the lowest one as the FiCO
2
.
In the [
CO
2
Setup
] menu, select [
Max Hold
] and toggle between [
Single Breath
], [
10 s
],
[
20 s
] and [
30 s
].
„ [
Single Breath
]: EtCO
2
and FiCO
2
are calculated for every breath.
„ [
10 s
], [
20 s
] or [
30 s
]: EtCO
2
and FiCO
2
are calculated using 10, 20 or 30 seconds of
data.
16.3.7 Setting the Flow Rate
For the sidestream CO
2
module, you can change the sampling rate of respiratory gas in the
patient’s airway by setting the flow rate. To set the flow rate, enter the [
CO
2
Setup
] menu
and select an appropriate setting from [
Flow Rate
].
WARNING
z
Consider the patient’s actual bearing capability and select the appropriate flow
rate when setting the flow rate.
16.3.8 Setting up the CO
2
Wave
In the [
CO
2
Waveform
] menu, you can:
„ Select [
Wave Type
] and toggle between [
Draw
] and [
Fill
].
‹ [
Draw
]: The CO
2
wave is displayed as a curved line.
‹
[
Fill
]: The CO
2
wave is displayed as a filled area.
„ Change the size of the CO
2
waveform by adjusting the wave [
Scale
].