Mindray iPM-9800, Руководство оператора

Страница: 124 / 300

12-6
12.7 Changing NIBP Settings
12.7.1 Choosing NIBP Alarm Source
You can monitor for alarm conditions in systolic, diastolic and mean pressure, either singly or
in parallel. In the [
NIBP Setup
], select [
Alm Source
] and choose from:
„ [
Sys
]: alarms are given only when the systolic pressure violates the alarm limits.
„ [
Dia
]: alarms are given only when the diastolic pressure violates the alarm limits.
„ [
Mean
]: alarms are given only when the mean pressure violates the alarm limits.
„ [
Sys&Mean
]: alarms are given when the systolic or mean pressure violates the alarm
limits.
„ [
Mean&Dia
]: alarms are given when the mean or diastolic pressure violates the alarm
limits.
„ [
Sys&Dia
]: alarms are given when the systolic or diastolic pressure violates the alarm
limits.
„ [
All
]: alarms are given when the systolic or mean or diastolic pressure violates the alarm
limits.
12.7.2 Displaying NIBP Measurements
You can display one set or multiple sets of NIBP measurements simultaneously. In the [
NIBP
Setup
] menu, select [
Display NIBP
] and toggle between [
Single-Group
] and
[
Multi-Group
]:
„ [
Single-Group
]: only the latest set of NIBP measurements is displayed in the NIBP
parameter window.
„
[
Multi-Group
]: multiple sets of most recent NIBP measurements are displayed below
the waveform area. And PR displayed is derived from NIBP.
You can not display multiple sets of NIBP measurements in some screens such as the big
numerics screen and the 12-lead ECG analysis screen.
12.7.3 Setting the Pressure Unit
In the [
NIBP Setup
] menu, select [
Press. Unit
] and toggle between [
mmHg
] and [
kPa
].