Mindray iPM-9800, Руководство оператора

Страница: 122 / 300

12-4
12.5 Measurement Methods
There are three methods of measuring NIBP:
„ Manual: measurement on demand.
„ Auto: continually repeated measurements at set intervals.
„ STAT: continually rapid series of measurements over a five minute period, then return
to the previous mode.
12.5.1 Enabling NIBP Auto Cycling and Setting the Interval
1. Select the NIBP parameter window to enter the [
NIBP Setup
] menu.
2. Select [
Interval
] and then select a desired time interval. Selecting [
Manual
] switches to
manual mode.
3. Start a measurement manually. The monitor will then automatically repeat NIBP
measurements at the set time interval.
You can also start a measurement by pressing the [
Auto NIBP
] QuickKey. Then monitor will
then automatically repeat NIBP measurements at the set time interval per current settings.
12.5.2 Starting a STAT Measurement
1. Select the NIBP parameter window to enter the [
NIBP Setup
] menu.
2. Select [
NIBP STAT
]. The STAT mode initiates 5 minutes of continuous, sequential,
automatic NIBP measurements.
WARNING
z
Continuous non-invasive blood pressure measurements may cause purpura,
ischemia and neuropathy in the limb with the cuff. Inspect the application site
regularly to ensure skin quality and inspect the extremity of the cuffed limb for
normal color, warmth and sensitivity. If any abnormity occurs, move the cuff to
another site or stop the blood pressure measurements immediately.