Mindray iPM-9800, Руководство оператора

Страница: 191 / 300

21-3
21.3 Starting and Stopping Recordings
To manually start a recording, you can either:
„ Select the hardkey on the front of either the patient monitor or the recorder module,
or
„ Select the [
Record
] button from the current menu or window.
Automatic recordings will be triggered in the following conditions:
„ Timed recordings will start automatically at preset intervals.
„
If both [
Alarm
] and [
Alm Rec
] for a measurement are set on, an alarm recording will be
triggered automatically as alarms occur.
To manually stop a recording, you can either:
„ Select the hardkey again, or
„ Select [
Clear All Tasks
] in the [
Record Setup
] menu.
Recordings stop automatically when:
„ The runtime is over.
„ The recorder runs out of paper.
„
When the recorder has an alarm condition.
21.4 Setting up the Recorder
21.4.1 Accessing the Record Setup Menu
Select [
Record Setup >>
] in the main menu, and you can access the [
Record Setup
] menu.
21.4.2 Selecting Waveforms for Recording
The recorder can record up to 3 waveforms at a time. You can select, in turn, [
Waveform 1
],
[
Waveform 2
] and [
Waveform 3
] in the record setup menu, and then select the waveforms
you want. You can also turn off a waveform recording by selecting [
Off
]. These settings are
intended for realtime and scheduled recordings.