Mindray iPM-9800, Руководство оператора

Страница: 175 / 300

19-7
19.5 Reviewing Alarms
When a measurement alarm occurs, all relative measurement numerics at the alarm time and
related waveforms 2, 4 or 8 seconds respectively before and after the alarm trigger time are
stored. To review the stored alarms, select [
Review
] → [
Alarms
] to access the following
window. In this window:
„ You can set a time as the index for finding your desired alarm event. If you set a time
that is too early, the earliest alarm event will be recalled. If you set a time that is too
late, the last alarm event will be recalled.
„ You can view the desired measurement alarms by selecting [
Event
] and then selecting
the measurement whose alarms you want to view. [
All
] includes all measurements.
„ To select an alarm event for viewing, you can either:
‹ Select the or button, or
‹ Directly select your desired alarm event on the screen.
„ Select an alarm event then [
Waveforms
], and you can enter the following window.
The waveforms related to this alarm event are displayed in the waveform area, and the
parameter values happened at the event moment are displayed in the parameter area.
1. Waveform area 2. Parameter area
1
2