Merging Technologies Ramses MSC Provisional Скачать руководство пользователя страница 86

Страница: 86 / 159

Edit Bay

11 - 86

Ramses MSC reference guide

Edit Bay : Introduction

11 Edit Bay

Introduction

Scope

The edit bay will function as described in this document, although please bear in mind that functions will be
added in the coming months to arrive at the full functionality of Edit Bay as labelled on its surface.

We have developed workarounds for the few remaining functions not yet available.

All functions

NOT

described in this quick start guide are already fully functional as they will be in the final

version. Please refer to the labelling on the Edit Bay surface and to the Pyramix 6.0 user manual for the
specifics.

Software Versions

Important Note:

It is

ESSENTIAL

to have the following versions of software or later to avoid unpredicatable

operation:

•

Pyramix Version 6.0.4 Pre RC1 build 323

•

Ramses Consolesoft 1.5.3 3709 14th November 2007

•

Edit bay Consolesoft set2 21st November 2007

Please refer to the Ramses update guide and Pyramix 6 Installation Guide for guidance on how to install
those updates.

Содержание Ramses MSC Provisional
































































































































































Результаты поиска

Содержание Ramses MSC Provisional

Отзывы:

Бренды по названию

Популярные бренды

Merging Technologies Ramses MSC Provisional, Справочное руководство

Результаты поиска

Содержание Ramses MSC Provisional

Отзывы:

Бренды по названию

Популярные бренды