Pyramix Monitor Section
9 - 68
Ramses MSC reference guide
Pyramix Monitor Section : Configure page
Output Patch:
This is where the Monitor’s Speaker Set outputs are patched to physical outputs.
Clicking on a cell pops up the
Set Output Connection
menu with all available physical outputs grouped by
their connectors. The sub-menus list the group and the individual channels. Select an individual channel to
connect it or select the group, e.g.
AES/EBU (#11291) Front
to connect the whole group in ascending
order from the cell clicked on.
Note:
Each Speaker Set has its own
Output Patch
associated with it. This is useful where
different speakers are used for different formats. If there is only one set of speakers patch
all Speaker Sets to the same physical outputs.
Double Assignment
When an output of the Mixer and an output of the Monitor are connected to the same physical output then
these are summed and the Mixer displays the connection in orange as a warning.
Speaker Delays
Delay can be set per Speaker by clicking in the box below the Output Connection and typing in a value.
Speaker delays are typically used to compensate for the physical positioning of the loudspeakers for exam-
ple where the Left Centre and Right speakers are placed in a straight line, the Centre speaker will be
nearer to the listening position and should be delayed accordingly.
Saving Speaker Sets
Mixer to Monitor connection status is saved in the project.
The Speaker Set settings are saved when you leave the page to go back to the
Monitor !
page; otherwise,
modifications are not saved.
Monitor Configure Output Patch
