Pyramix Mixer
12 - 114
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Aux Buses In-Place Panning
In-Place
panning for each Aux bus is turned on with the
IP
button in Aux Send section(s) of each Input
Strip.
In-Place
Aux Sends take the ouput(s) of the appropriate panner at the same level(s) the panner is
feeding its output bus.
Note:
Only corresponding Bus
Types
are fed in this way. Thus if you feed a Mono Aux Bus
typed
C
enter from a 5.1 panner and there is no signal on the centre channel no signal will
be fed to the Aux Bus even if the signal on the left and right outputs is identical creating a
‘phantom center’.
In-Place Panning Source
When an
IP
button is lit (yellow) on an Input Strip, the way in which the aux send channels are routed to an
Aux bus is determined in the Aux return strip. For example, in a mixer configuration with an Aux bus, a Sur-
round bus and a Stereo bus. Clicking on the highlighted box below the Aux master fader pops up a list of
options:
These determine whether the Aux send will follow one of the output bus panners or the Static Channel
Assignment set in the Input Strip. E.g. for Aux bus 1:
In-Place Panning Indicator/Selector
In-Place Panning Source pop-up
