Pyramix Mixer
12 - 110
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Groups
Master Group Strips - allow the grouping of faders of several mixer strips. Analogous to VCA grouping.
When a group or groups are added (from the mixer contextual menu
Settings > Add Strip > Group
) A
group button for each group created will appear below the strip name box on each input strip. When
selected, the associated Group strip will control the grouped input strips if the
On
button is lit on the Group
strip.
Channel Direct Outputs
All input strips can have
Direct Outputs
. The
Direct Out
connection is disabled by default. It can be
enabled in the
Configuration
Page by selecting the strip and clicking on the
DO: Off
box or disabled if the
box shows
DO: On
. Alternatively Direct Out can be set in the
Route
Page by clicking on the Strip Header.
The
Direct Out
can be routed by Channel to any output of the HDTDM or XDTDM bus. The Direct Out can
be sent Pre or Post Fader. Click on the
DO: Post
box
in the Mixer I/O section to toggle. The Direct Out is
currently always
Post Effects
. For multi-channel strips clicking in the box above the
DO:
box pops-up a
Set Direct Out
list:
Highlight the required channel. This will be fed to the logical output assigned in the
Mixer Route
page or by
clicking on the
DO
XLR
icon in the
Mix
page.
Although there can be any number of Input Strips and Busses from 1 to 64 in
HDTDM
or 1 to 128 in
XDTDM
, there is a limitation on the number of Direct Out connections: The sum of the
Direct Out
connec-
tions
PLUS
all Busses channels can not exceed
64
in
HDTDM
or
128
in
XDTDM
.
Strip & Bus Channel Types
All Strips and Busses Channels have a custom type that can be manually set in the
Configuration Page
to:
•
Left (L)
•
Center (C)
•
Right (R)
•
Surround Left (Ls)
•
Surround Right (Rs)
•
LFE (Lfe)
•
Left Center (Lc)
•
Right Center (Rc)
•
Surround Center (Cs)
•
No particular type
Mono
Strips are tagged by default to no particular type
Set Direct Out
