Strip and Bus Tools
13 - 146
Ramses MSC reference guide
Strip and Bus Tools : Bus Tools
Sections
The
Input
,
EQ
, and
Output
sections are almost identical to the ones found in
Strip Tools
. Please see the
relevant paragraphs in the
Strip Tools
section for a full description. Where there are differences, these will
be dealt with here.
Shortcuts
,
Linking
and
Automation
functions are the same as
Strip Tools
.
From top to bottom, the Bus Tools plug-in contains the following sections:
Input Level
This section contains the input level control and shows the name of the mixer
strip this instance of the plug-in is assigned to.
Limiter
This section contains the limiter, which either acts as a standard limiter, but it
can also work in conjunction with Limiter DRC section below.
Limiter DRC
This section adds a Dynamic Release Compensation (DRC) to the Limiter sec-
tion. This enables very musical control of the release time of the limiter.
Equalizer
This is a five band fully parametric equalizer. Each band can be switched to high
or low pass, shelving or peaking characteristics.
Output
This section controls the output level of the Bus Tool and also offers automatic
gain make up for the Limiter.
