Pyramix Mixer
12 - 113
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Aux Send Routing
When a Strip feeding an Aux Bus is of the same type as the Aux bus E.g. Stereo strip feeding stereo Aux
bus 5.1, Strip feeding a 5.1 Bus the sending Strip’s Channels are automatically routed to the corresponding
Aux bus Channel Type. (Left to Left, Right to Right, etc…).
Where the sending Strip differs in Type to the Aux Bus E.g. a Stereo Strip feeding a 5.1 Aux Bus, the rout-
ing must be made manually. The same method is used if you wish to alter auto-routed values.
Static Channel Routing
Aux Send Channel Routing is set by clicking on the little grid icon adjacent to the knob on the Aux Bus send
in the channel strip. This opens a
Channel Routing
window:
Shown here with a 5.1 channel feeding a 5.1 Aux Bus. Gain values can be entered for each node of the
Strip/Bus crossing. Just click on any node and enter a dB value. Enter nothing (no character) or -144.5 to
reset the node to Mute.
Clear
Clears all nodes to
Mute
Auto
Sets a
1 : 1
flat routing as shown above
Channel Routing window
