Pyramix Mixer
12 - 120
Ramses MSC reference guide
Pyramix Mixer : Mixer Delay Compensation
XDTDM Routing > PCM I/O routing
or
PCM-HSR I/O Routing
if using
XDTDM
mode.
DXD Projects I/O Routing
if you wish to use Internal Return Busses in a
DXD
Project.
The number of Internal Return Busses can be set using the
Internal Busses
combo box. Click on the
OK
button to memorize the setting and exit.
The number of
Internal Return Busses
you assign here will be available as possible channel strip sources
in the mixer.
Mixer Delay Compensation
Summary
Mixer Delay Compensation offers a choice between:
Full Delay Compensation
(including effects)
All but effects latencies
Off
This choice is made in the
All Settings > Project > Mixer > Mixer Settings
page along with a switch to
turn Automatic Compensation on or off and a slider to set the
Maximum Mixer Delay Compensation
.
Delay Compensation Switching
As detailed above, Compensation can be selected in the
All Settings
menu. It can also be toggled On/Off
in the Mixer context menu. Right click and select
Settings
then click on
Enable Delay Compensation
to
toggle On or Off.
Note:
The
Full Delay Compensation
/
All but effects latencies
setting is retained when
Compensation is switched on and off from the mixer window.
With Mixer Delay Compensation turned
On
and
All but effects latencies
selected:
1.
Input strip set as a (normal) Input: no compensation. If a Delay is applied manually the output signal of
this strip will be delayed by the applied value.
2.
Input strip used as an Aux or Bus return, i.e. patched to an Internal Bus and set as an Aux or bus return
(see
Input Strip Mode on page 122
): all other Output Strips are automatically delayed by the amount
equal to the Bus internal processing delay.
3.
Input strip used as an External Aux or Bus return, i.e. where the Aux or bus signal is sent outside the
workstation and returned to a physical Input: All other Strips are automatically delayed by the amount
equal to the Bus internal processing delay providing the Input is set as an Aux or Bus (see
Input Strip
Mode on page 122
). If a Delay is applied manually, for example to compensate for the delay in an
external processor, the signal of all other output strips will be further delayed, according to the value
entered.
When
Full Delay Compensation
is selected, Plug-in effects that correctly report their latency will also
have their delay compensated. Further, this delay will be maintained when the plug-in is in
bypass
mode.
Please see also:See “Delay Compensation Policy” on page 154.
