Pyramix Monitor Section
9 - 67
Ramses MSC reference guide
Pyramix Monitor Section : Configure page
Two sets,
Stereo
and
Surround 5.1
are factory defined and cannot be altered. New Sets and Down-Mixes
can be
Create
d,
Duplicate
d and
Delete
d using the Command buttons.
Max Vol
To set the maximum volume attainable click on the value box to highlight it and type the desired value then
hit
Enter
or click elsewhere on the window to save the change.
Dim Value
To change the Dim Level, click on the value box to highlight it and type the desired attenuation value then
hit
Enter
or click elsewhere on the window to save the change.
Note:
Only negative values are accepted. Positive values revert to 0dB. I.e. Type “
-15
”
Commands
Speaker Sets
New Set
Clicking on
New Set
creates a new Speaker Set with a blank matrix Grid and adds a new entry to the
Avail-
able Sets
list with the label highlighted ready for text entry:
Type a suitable name and click on a blank area or hit
ENTER
to accept the name.
Duplicate Set
Creates a new Speaker Set with a the same matrix Grid settings and Down-Mixes and settings as the set
currently selected (underlined) and displayed in the grid. The new label is highlighted ready for text entry.
Delete Set
Deletes the currently selected (underlined) Speaker Set.
Down-Mixes
Add Down-Mix
Creates a new Down-Mix associated with the currently selected Speaker Set with a new tab in the
Main
Grid
and
Down-Mixes
section.
Remove Down-Mix
Deletes the current Down-Mix
Monitor Configure New Speaker Set
