Introduction
1 - 8
Ramses MSC reference guide
Introduction : Scope
1 Introduction
The Ramses MSC
comes in two different chassis types and three models (8, 16 and 24
faders) plus an optional
Edit Bay
and the
ARC.
To aid understanding we have named the various Ramses panels:
•
Fader Panel
=
per 8 faders
•
EQ Panel
=
per 8 channels including Aux and Pan
•
The Monitor Panel
=
Monitoring Section and Transport Bar
•
The Expert Panel
=
Navigation, Automation, grouping.
•
The Upper Active Panel
=
System management, Active Screen (TFT Touch)
•
The Lower Active Panel
=
Master routing Panel, quick transport and locators
•
Meter Bridge
=
A Pyramix window which provides a Meter Bridge
for the Ramses MSC. This can be viewed on any
monitor connected to the Pyramix workstation.
Options
•
Edit Bay
=
Pyramix Editor Remote including a Transport Bar
•
ARC
=
48 Channels or 72 Channels depending on the
Ramses Chassis
Scope
This manual is written for
Ramses Consolesoft version 1.5.3 3572
with firmware
1.5.2.31
in conjunction
with
Pyramix version 6.0
and although most of what is outlined here will be relevant to other versions of
the software, please check to see if a more recent of this document exists on the Merging website.
Document Organisation
This document is organised mainly by control groupings, so if you are mystified as to the function of a given
control, please refer to the chapter that describes the panel it is located on and then cross-reference the
number printed on the panel image at the beginning of the chapter to locate the description for that control.
All
Contents
and
Index
entries and cross-references including the numbers referred to in the
previous paragraph are hyperlinks. Just click on them to jump to the information.
Updating
Please refer to the
Ramses MSC Software Upgrade Guide
for detailed information on upgrading your
firmware, Consolesoft and Edit Bay Sets.
Latest updates of Ramses and Pyramix
We strongly advise checking at:
www.merging.com/ramses/download
