EQ Panel
4 - 27
Ramses MSC reference guide
EQ Panel : EQ Aux and Pan Strip
9 aux knob
Controls the send level to the selected aux bus.
10 aux IP
When lit Aux will be sourced from the ‘In Place’ strip output including fader gain.
11 aux PF
When lit Aux is sourced pre-fader
12 aux on/off
Toggles selected Aux send on and off. On when lit.
13 pan
The
pan
encoder on the channel strip allows pan / balance control from left to right in the pan field. For sur-
round panning, use the
Joystick
on the
Active Panel
. Please see: . Divergence and LFE controls can
also be updated from the
Active Panel
.
The channel strip
pan
encoders display surround information as well as the left to right position. There will
always be a single LED to indicate the left to right position - this LED travels from 9 o'clock to 3 o'clock
across the top of the encoder. If there is any front to back panning information, the bottom 5 LED's below
this line display the F-R position.
•
If there is no front-to-back information, the bottom front-to-back LEDs will not be lit.
•
If the pan position is all the way to the front, the bottom front-to-back LEDs will not be lit.
•
If there is front-to-back information but the pan position is all the way to the left, only the left front-to-
back LED will be lit.
•
If there is front-to-back information but the pan position is all the way to the right, only the right front-
to-back LED will be lit.
Note:
For access to EQ controls additional to those on the channel strip, such as Q, band
in/out and Filter controls - use the Active Panel.
