Pyramix Mixer
12 - 108
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Provides several stereo outputs and allows any input strip to be routed to any or all of them
Surround Mix - 5.1 format
Multiple Surround Mix - provides several surround outputs and allows to route any mixer strip onto any of
them.
Note:
Unlike mono and stereo multiple busses, input strips can only be routed to ONE 5.1
destination stem of a multiple surround bus. This reflects their normal use. E.g. a common
set-up will have three surround bus stems for Dialogue, Effects and Music. Each Input strip
is routed to the appropriate surround bus by clicking on the
Stem ‘X’
button.
All surround bus stems can be summed for monitoring in the
Monitor
.
Multiple Mix Busses
Mono / Stereo
When a mono or stereo multiple mix bus is added to the mixer a routing matrix box appears in the input
strips with a send level control (mono) or pan control (stereo).
The 8 by 8 matrix gives access to up to 64 output busses. Routing is shown by lit crosspoints.
Double-clicking the matrix in the strip opens the routing matrix window.
Valid choices are shown in gray. Once the window is open, other input channels can be route by either
selecting them from the drop-down list or using the
<
and
>
arrows to step across the mixer surface.
Mix bus matrix
Mix bus routing matrix
