Pyramix Mixer
12 - 116
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Basic Strip
A basic mono channel strip contains:
On /Off
toggle switch
Pan
pot to Main output bus. In this case there is just a single stereo mix bus.
Numeric display
of fader output level value, if cursor is over a fader knob shows
fader gain. If cursor is over pan-pot, shows current pan position. May be clicked to
directly enter a fader gain value.
Level Bargraph Rotary Controls and Faders
Rotary Controls and Faders may be adjusted by grabbing them with the mouse and
dragging. Rotary controls are adjusted by dragging left or right and faders by drag-
ging up or down. Double-clicking a Fader or Rotary knob returns the value to the
default. E.g. unity gain on a channel strip fader. Bargraph shows peak level
Buttons
Buttons on the main mixer surface are black when inactive. When active they ‘light
up’.
Solo
solos the strip,
Mute
mutes the strip
Ctrl + Solo
cancels all other Solos
S
A
F
E prevents the strip being muted by solo operations elsewhere.
Ø
reverses the
channel phase.
PF
changes the metering position to Pre-Fader.
Delay
A delay value (in samples) can be set in this box.
Input
Clicking on
Input
pops-up a box with the choice of the strip taking its input
from a physical connection or any output bus.
Logical Input and Direct Output Assignment
Right-click on the XLR icons to pop-up a drop down list of valid assignments.
Note:
Direct Outputs must first be enabled in the
Configure
page.
Please see: Channel
Direct Outputs on page 110
Stereo Strips
In a Stereo Strip feeding a stereo bus the pan pot is replaced by a balance control and the single bargraph
meter is replaced by a pair.
Stereo Strips can reverse the
Phase
of both the Left and Right channels. The single button has four possi-
ble states:
Black:
No phase inversion
White:
Left
channel inverted
Red:
Right
channel
inverted
Blue:
Both channels
inverted
Basic Strip
