Pyramix Mixer
12 - 124
Ramses MSC reference guide
Pyramix Mixer : Configuring a Blank or Existing Mixer
Effects Delay Indication
When the mouse cursor is hovered over a plug-in in a strip the required delay value is displayed:
Here you can see that
Angudion II
currently requires a 448 sample delay to be applied to the other output
buses. This will be applied automatically when
Full Delay Compensation
is switched on.
Configuring a Blank or Existing Mixer
Configuration of the mixer control surface is accomplished via the
Configure Page
,
Route Page
(
Please
see: Configure Page on page 94 and See “Route Page” on page 102.
) or
contextual menus. The pre-
cise options available will depend on where you click on the mixer. If you wish to affect the entire mixer,
right-click on the top bar of the Mixer window. To change options for a Bus, right-click on a blank area of the
Bus strip. Similarly, for a channel input strip, right click on a blank area of the Strip. Right-clicking within a
function block adds menu entries to the top of the list, relevant to the specific block.
Adding Strips
Right-click anywhere on the Faders, choose
Strip
>
Add
and select the appropriate type of strip to add or
right-click anywhere on the Faders, choose
Bus
>
Add
and select the appropriate type of bus to add.
Removing Strips
To remove a given input strip, bus or group, right-click directly on it and choose
Strip
>
Remove (Strip,
Bus
or
Group)
as appropriate.
Mixer I/O Assignments
To or from physical I/O
To change
I/O
assignments to or from physical
I/O
or the
Internal Return Busses,
click on the appropriate
XLR icon
. Choose
Connect Input
or
Connect Output
from the pop-up menu and choose the desired con-
nection.
When connecting a multichannel strip clicking on the header (ADAT(#11290) Optical B in the above illustra-
tion) will connect all channels consecutively.
Plug-in Name and Delay pop-up
I/O assignment pop-up
