Pyramix Mixer
12 - 115
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Off (Use Channel Routing Grid)
Aux pan follows Static Channel Routing assignment
SR1 (Surround Mix)
Aux pan follows Surround Mix bus panners
ST1 (Stereo Mix)
Aux pan follows Stereo Mix bus panners
To make all the Aux 1 sends follow the Mixer Strip Surround Panners, click on the box below the fader and
select
SR1 (Surround Mix)
Note:
When
IP:Off
is displayed in the Aux master strip I.e. no In-Place source is selected,
then the
IP
buttons in the input strips will be grayed out. Similarly, when an In-Place source
IS
selected and the yellow
IP
button in the input strip is lit then the static routing grid is
grayed out and unavailable as in this illustration.
The three strips shown are
10
,
11
,
and
12
. Since the
IP
button is selected (Yellow) on strips
10
and
11
the
static routing grid is grayed out and thus unavailable. On strip
12
the
IP
button is deselected (dark) and the
Static
Channel Routing
grid can be opened by clicking on the grid button next to the knob.
Note:
The
IP
button defaults to
On
when the aux send is first turned on. If the send is sub-
sequently turned Off (muted) then the current setting of the
IP
button is remembered when
it is unmuted.
Strip Aux sends and Channel Routing dialog
