manualshive.com logo in svg

Merging Technologies Ramses MSC Provisional, Справочное руководство

Поделиться
Скачать
Merging Technologies Ramses MSC Provisional Скачать руководство пользователя страница 53

 Expert Panel 

6 - 53

Ramses MSC reference guide

Expert Panel : Expert Panel Overview

31/32 Auto Write

Automation

Holding down the Automation 

read

 and 

write 

buttons together and then injecting any fader will change the 

state of the selected strip to automation 

read Mode

 (or just the section(s), 

EQ, Dynamics

, 

AUX 

etc. if you 

touch them in the 

Active Screen

).

Strips selected using this mode remain in Automation 

auto-write

 mode until another mode is selected for 

them.

While the

 read

 & 

write 

buttons are held down, the 

Meter Bridge

 indicators display all channels currently in 

auto -write 

by lighting both 

read 

and 

write 

indicators if automation feedback is activated in the Meter 

Bridge configuration. 

Please see: Automation Fader Mode  on page 85

Auto Write buttons indicators

The Automation Read and Write button indicators are illuminated when the Read and Write buttons are 
pressed.

Tips and tricks.

•

You can have two automation status options, set in the 

Active Screen System > Configure

 menu. 

One is  single automation status per channel. I.e. Wherever you touch, the fader or inject will 
change the automation status for the entire channel. The second option is per section. If you 
change the automation status and e.g. touch the fader or the EQ button, the automation status only 
changes for those elements touched. If you wish to change the status for the entire channel then 
use 

inject

. 

Note: 

The automation LED adjacent to the fader indicates the automation status for the 

fader 

ONLY

 in the second mode.

Содержание Ramses MSC Provisional
































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды