Pyramix Mixer
12 - 111
Ramses MSC reference guide
Pyramix Mixer : Mixer Components
Stereo
Strips are tagged by default to
L-R
MS
strips are tagged by default to
C-W
GPS
Strip (General Purpose Strip):
GPS
Strips can have from 1 to 8 channels
They can be used as Aux returns or for any kind of direct Input usage e.g. premixes or multi-channel
recordings.(LCR, LCRS, etc…) By default a 2 channel GPS Strip is initialized to L-R and a 6 channel GPS
Strip is initialized to LCRLsRsLfe 5.1. This can be changed/customized in the Configuration Page.
GPS Strips feeding any busses (Aux or Mix) are routed by default by Channel Type (like any other strip) but
this routing can be manually changed by clicking on the Channel Routing grid (like any other strip).
Aux Busses:
General Purpose
Aux busses
provide a way to create ‘auxiliary’ mixes which are normally used to provide
headphone or cue mixes for musicians, or to send signals to effects such as reverbs, delays, choruses, etc.
Aux Busses can have from 1 to 8 channels. Channels have a custom type that can be manually set in the
Configuration Page to:
•
Left (L)
•
Center (C)
•
Right (R)
•
Surround Left (Ls)
•
Surround Right (Rs)
•
LFE (Lfe)
•
Left Center (Lc)
•
Right Center (Rc)
•
Surround Center (Cs)
By Default a 2 channel
Aux Bus
is initialized to
L-R
and a 6 channel
Aux Bus
is initialized to 5.1. This can
be changed/customized in the Configuration Page.
Note:
When an Aux bus is added it is important to ensure that the Type for each channel of
the Aux bus is set correctly.
