![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075039.webp)
RCP User’s Guide
July 2017
Page 39 of 110
Field
Description
Activate Password
The password is used to restrict access to the configuration menu on the
device. Having an active password prevents accidental changes to the device
configuration.
NOTE: Please familiarize yourself with this section before programming the
password.
The password default setting is to be disabled during initial programming by
the RCP software. To enable password protection, check the box next to the
phrase “Activate Password.”
If you choose to enable the password function, you can create a new
password by selecting a four-digit numerical password using numbers from 0
to 9. Be sure to write this password down in a safe place for future reference.
PWM Frequency
The Pulse Width Modulation (PWM) frequency is the frequency that the
outputs will operate at when configured for either open loop or current
compensated mode. This feature can be selected by the user using a range
from 33 to 1000 Hz (open loop) or 75 to 1000 Hz (closed loop).
Update Date/Time
The user can match the device time to the PC time or choose to set a time
other than the time on the PC.
ESTOP
Configuration
This field allows the user to define how the ESTOP/Output pins are
configured.
The pins can be configured as:
o
ESTOP1 - ESTOP2
o
ESTOP1 - Digital Output 2
o
Digital Output 1 - Digital Output 2
Table 5. Unit Info Field Descriptions
WARNING
THE ACCESS CODES IN THE RECEIVER ARE UNIQUE AND FACTORY PRESET. DO NOT CHANGE THESE
ACCESS CODES UNLESS YOU ARE REPLACING AN EXISTING RECEIVER AND ITS ACCESS CODE.
CHANGING THIS CODE COULD MAKE IT COMMON WITH ANOTHER RECEIVER ACCESS CODE, WHICH
COULD MOVE OTHER EQUIPMENT. NO TWO SYSTEMS IN ANY LOCATION SHOULD EVER HAVE THE SAME
ACCESS CODES INDEPENDENT OF FREQUENCY. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN
SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
WARNING
ALWAYS REMEMBER TO STORE THE PASSWORD IN A SECURE LOCATION FOR ACCESS IF THE
PASSWORD IS LOST OR FORGOTTEN. ONCE THE DEVICE IS PROGRAMMED WITH A PASSWORD, THERE IS
NO WAY TO DEFEAT THE PASSWORD WITHOUT USING THE RCP SOFTWARE TO EITHER READ THE
PASSWORD OR REPROGRAM A NEW PASSWORD.
Содержание RCP
