![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075030.webp)
RCP User’s Guide
July 2017
Page 30 of 110
lower priority will bump to the next line based on the min and max display line values. Feedback
also affects which line the text will be displayed on. The feedback priority has the natural priority
over any configured inputs. This means that if you configure feedback and an input to display on
the same line as having the same priority, the feedback string will be displayed over the input. If
the input is configured to have a range using the min and max display line values then the input
will be bumped to the next available line in the range.
Input Type
– This is the type of joystick/paddle connected to this input. Refer to the drawings for
the transmitter to determine what input type should be used.
o
None
o
JC120
o
JC400 Standard
o
JC400 PTO
o
JC400 Rotary
o
JC3000
o
Metallux X Axis
o
Metallux Y Axis
o
Dual Single Axis
o
Dual Mini
o
Legacy
o
Legacy 10 90
o
Potentiometer
Input Sub Type
– This is a second parameter to define the input in more detail. This defines if
the input should be read as a strictly proportional input or if a different number of speed points
should be used.
o
None
o
Proportional
o
SP1
o
SP2
o
SP3
o
SP4
o
SP5
Invert
– This parameter changes the polarity of the input. The display text and data transmitted
within the RF message is inverted.
7.2.3 Analogs
For analogs, the user has the ability to configure these parameters of the input:
Configured
– Determines if the input is configured and enabled in the device.
Generic Input Name
– The name that shows up if the user does not enter text into the Input
Name cell. This name cannot be changed by the user.
Input Name
– The user-defined name that will display on the LCD when the input is active. It has
the ability to take a set of 3 “#” and replace it with the 0-100 value read from the analog input on
the device. The 0-100 value is a percent of full scale for the input. The ### can be moved around
Содержание RCP
