![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075066.webp)
RCP User’s Guide
July 2017
Page 66 of 110
shows the RF Command, Function, and bit that need to be chosen to access the button command via the
RF message.
Flex VUE Button Number
RF Command / Function
1
Motion/Function 1
2
Motion/Function 2
3
Motion/Function 3
4
Motion/Function 4
5
Motion/Function 5
6
Motion/Function 6
7
Motion/Function 7
8
Motion/Function 8
9
Motion/Function 9
10
Motion/Function 10
11
Motion/Function 11
12
Motion/Function 12
Table 12. Flex VUE Transmitter Button Mapping
9.2.3 Transmitter Button Layout –
tele
Pendant/
tele
Pilot
Figure 41:
tele
Pilot, 2-Speed and Single-Speed Transmitters
Table 13 shows how the buttons from the TX12M-1 shown in Figure 41 map to the RCP RF Command
and Function. The first column shows the button number based upon the figure. The second column
shows the RF Command, Function, and bit that need to be chosen to access the button command via the
RF message.
Содержание RCP
