![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075032.webp)
RCP User’s Guide
July 2017
Page 32 of 110
From this screen the user will have the ability to assign RF Command data to custom-defined text to be
shown on the display.
7.3.1 Formatting Feedback String
When configuring a feedback string the user has the ability to reserve the number of decimal places
before and after the decimal point. This is done using at least three consecutive ‘#’ characters in the
feedback string field.
There must be at least three ‘#’ characters to indicate that the value being passed back to the device will
be displayed on the screen. A maximum of eight digits can be placed to the left of the decimal point and a
maximum of four digits can be placed to the right of the decimal point. Any extra digits to the right of the
decimal point will be truncated to the number of defined digits to display. Any extra digits to the left of the
decimal point will cause the value to expand and push the value to the right. If the number of digits in the
value is less than the number of defined ‘#’ characters, the display will offset the value being displayed.
Refer to Table 3 for examples of how using the ‘#’ character is used to format the value on the display of
the device.
Feedback String Examples
Value
Display
###
0
__0
########.####
0
_______0.0000
###.##
100
100.00
###.#
54.1
54.1
##.#
89.49
89.5
####
12345
12345
Table 3. Feedback String Examples
NOTE: The underscore (_) in the above display examples is only to show how the value is offset.
RF Command Type
Function 1‐16
Delete row
The line the text
will be displayed
on. (1‐6)
Priority of message.
Describes how the data is to
be used.
‐Display value with text
‐Use value to lookup string
The bit position to look at in
message (1‐16)
Scale the incoming value
with bit weight and offset.
Disabled if value/string
pair.
Lookup value used for
displaying string.
Text displayed
Delete value/string
pair entry
Add string/value pair
Used for describing
the group of
value/string pairs.
Offset. A value
added or subtracted
to the value
The number of bits to use as a
value.
Содержание RCP
