![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075033.webp)
RCP User’s Guide
July 2017
Page 33 of 110
7.3.2 Examples
7.3.2.1
Single analog feedback value
The user configured the receiver (in RCP) to place an ID value in an RF Command Type of Analog and at
Function 1. When the ID value in the RF message is 21 there shall be a message displayed on the
screen that reads “MY string.” The text is to be displayed on line 2 with a priority of 2.
7.3.2.2
Multiple analog feedback values
The user wants to display text on line 2 of the screen when values 5 or 6 are received.
7.3.2.3
Digital bit value
The user wants to display the text “Normal” if the value is 0 and “Overload” if the value is 1.
If the entry for value 0 were deleted, then no text would be shown on the display when the value was 0.
7.3.2.4
Scaled analog value
This example shows an analog value being received. The value is scaled such that each bit is weighted
at 0.4 and the entire value is offset by -40. This will provide a displayed range of -40 to 26,174.4. The
value is then displayed after the text “Temperature.” The value will show at least 3 digits.
Содержание RCP
