![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075041.webp)
RCP User’s Guide
July 2017
Page 41 of 110
When programming I/O (specific to devices that have configurable I/O), Table 6. Available Properties
Based on I/O Type describes which parameters are configurable for each of the output types. These
properties can be modified using the property grid.
I/O
Type
Property
Min
Current
Max
Current
Start
Ramp
Stop
Ramp
Min Duty
Cycle
Max Duty
Cycle
Output
Digital Momentary
N/A
N/A
N/A
N/A
N/A
N/A
Output
Digital Latched
N/A
N/A
N/A
N/A
N/A
N/A
Output
PWM Open
N/A
N/A
X
X
X
X
Output
PWM Closed
X
X
X
X
N/A
N/A
Input
PWM
N/A
N/A
N/A
N/A
N/A
N/A
Input
Digital
N/A
N/A
N/A
N/A
N/A
N/A
Table 6. Available Properties Based on I/O Type
8.1.2 CAN Configuration
For devices with configurable CAN, Figure 6 shows the selection of the CAN 1 bus and the grid changes
to the configurable properties of the CAN bus. This allows the user to modify the CAN bus network
communication settings by selecting which CAN bus to configure.
Figure 6: CAN 1 Bus Configuration (MHR)
Содержание RCP
