![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075060.webp)
RCP User’s Guide
July 2017
Page 60 of 110
Rotary#
Digital input connection for each of the rotary positions
Toggle#
Digital input for a toggle connection
Table 11. Pin Out Legend
Figure 30: CHTX and MLTX2 Labeled Toggle Connections (Side 1)
To map a paddle’s forward and reverse motion when the paddle is plugged into the Motion 1 connection,
two channels are required in RCP to handle the forward and the reverse motions. To determine how the
channels are configured, refer to the tables in Section 9.2.4 to determine the Command Function values.
Dir 1 is away or to the right of the user and Dir 2 is towards or to the left of the user. From the table, it is
apparent that the forward motion (away from the user) maps to Command Function 1 and the reverse
motion (towards the user) maps to Command Function 2.
For the analog connection there are various components that can connect to this connection. The analog
pins on the connector map to Analog Functions 9-13 when configuring the RF channel in RCP.
Содержание RCP
