![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075105.webp)
RCP User’s Guide
July 2017
Page 105 of 110
Figure 53: Dead-band Examples
Value Type:
Constant – The On/Off properties are used as
constants.
Percentage – The On/Off properties are used as
percentages.
Percent of:
the value that the percentages are taken
against. Since the input to this channel can be an 8‐
bit or 16‐bit value.
On Value:
The value that the output of the channel
transitions from 0 to 1.
Off Value:
The value that the output of the channel
transitions from 1 to 0.
Custom Name:
Allows the user to put a name on the
channel for reference.
Input:
The channel that is used as input and
converted in to a digital signal.
Notes:
Allows the user to add notes.
Figure 54: Analog to Digital Dead-band Properties
9.3.10 Timer Channel
This channel allows the user to add a timer to the project. The timer channel has two modes of operation.
Free Running:
In this mode the timer doesn’t require any input and starts as soon as the device’s RF link
becomes active.
Trigger Based:
When the timer operates in this mode there are properties that allow the user to select
what triggers the timer to start and what triggers the timer to stop.
Figure 55: Trigger Timer Example
Содержание RCP
