![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075082.webp)
RCP User’s Guide
July 2017
Page 82 of 110
9.3.2 Mapping an Incoming RF Message
This section will show how to map an incoming radio message.
Please refer to Table 15 in Section 9.2.4 when mapping the incoming RF messages.
This example will map button 1 of a Flex VUE transmitter to an output configured as PWM open loop on
an MHR receiver, but this can be mapped to any output type on any of the supported programmable
devices.
Start by creating a new project with an MHR device selected and allow the device configuration to be
read. This is the same process explained in Section 5. Once the project is started, navigate to the
Programming tab across the bottom of the UI.
Содержание RCP
