![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075106.webp)
RCP User’s Guide
July 2017
Page 106 of 110
Figure 56: Free Running Timer Example
Timer Channel
Description and Settings
Configuration
Auto Reset
Yes
Set to Yes and is Read-Only if Timer Type is set
to Free Running.
If Timer Type is Trigger choices are:
Yes: Timer runs continuously.
No: Runs 1 period and stops.
Timer Type
Free Running
Choices:
Free Running: Runs continuously.
Trigger: Run cycle is determined by Auto
Reset property. Enables the properties in the
Triggers section.
Timer Starts
Low to High Transition
Choices:
Low to High Transition: Timer starts on a low
to high input signal transition.
High to Low Transition: Timer starts on a high
to low input signal transition.
Reset Output State
Inactive
Choices:
Inactive: Outputs a zero.
Active: Output a one.
Phase A Output State
Active
Phase B Output State
Active
Expired Output State
Inactive
Time (ms)
Phase A Time
0
0-10000ms Range
(See timing diagrams for details)
Phase B Time
0
General
Custom Name
Triggers
Start Trigger
Select a Channel
Select a channel to start the timer. A value
greater than zero will cause trigger.
Reset Trigger
Select a Channel
Select a channel to stop/reset the timer. A value
greater than zero will cause trigger.
Содержание RCP
