![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075088.webp)
RCP User’s Guide
July 2017
Page 88 of 110
9.3.3 Using the Matrix Channel to Configure Relays
This section will show how to use the Matrix channel to configure relays.
Please refer to Table 15 in Section 9.2.4 when mapping the incoming RF messages.
This example will map button 1 of a Flex VUE transmitter to an output/relay on an in
tele
Smart2 receiver.
The matrix and analog to step channels are only available on the in
tele
Smart2 receiver.
Start by creating a new project with an in
tele
Smart2 device selected and allow the device configuration to
be read. Follow the steps as detailed out in Section 5 to get started. Once the project is started, navigate
to the Programming tab at the bottom of the UI.
Drag the channel to the middle of the
work space.
Содержание RCP
