![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075031.webp)
RCP User’s Guide
July 2017
Page 31 of 110
in the string to give the user some flexibility on where the read value is displayed in the string. For
example, if the value was read at 50% of full scale:
Pot1 ### would show Pot1 50
Pot ### %% would show Pot 50 %
++ ### ++ would show ++ 50 ++
Display Line Min
– The minimum line on the display that the text will be shown.
Display Line Max
– The maximum line on the display that the text will be shown.
Priority
– The input priority for the display line. For example, if you have configured two inputs to
be displayed on the same line, you can configure which input has priority. The input with the
lower priority will bump to the next line based on the min and max display line values. Feedback
also affects which line the text will be displayed on. The feedback priority has the natural priority
over any configured inputs. This means that if you configure feedback and an input to display on
the same line as having the same priority, the feedback string will be displayed over the input. If
the input is configured to have a range using the min and max display line values then the input
will be bumped to the next available line in the range.
7.3 Feedback Configuration
The Feedback Configuration feature gives the user the ability to configure the feedback to the display of a
transmitter though the RCP user interface.
Figure 4. Feedback Configuration Interface
Содержание RCP
