![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075040.webp)
RCP User’s Guide
July 2017
Page 40 of 110
WARNING
THIS PASSWORD FUNCTION IS NOT TO BE USED AS A SECURITY DEVICE. THE PURPOSE OF THIS
FUNCTION IS TO PREVENT ACCIDENTAL CHANGES TO THE RECEIVER SETTINGS. THE BEST FORM OF
SECURITY IS ALWAYS TO LOCK UP THE DEVICE WHEN NOT IN SERVICE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
WARNING
NOT ENABLING THE PASSWORD FUNCTION ALLOWS THE DEVICE SETTINGS TO BE MODIFIED BY ANY
UNAUTHORIZED USER(S). IMPROPER DEVICE SETTINGS COULD RESULT IN SERIOUS INJURY OR DEATH
AND DAMAGE TO EQUIPMENT.
8.1.1 Device Block Diagram and Pin Properties Grid
The middle section of the Unit Info tab will display a block diagram of the device to be programmed. The
block diagram is interactive and will change what is displayed in the pin properties grid on the right side.
In these screenshots the device being programmed is an MHR. For programmable devices the screen will
have a similar layout.
A selection here…
…changes the properties
that are displayed in the
grid.
Содержание RCP
