![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075021.webp)
RCP User’s Guide
July 2017
Page 21 of 110
Unit Info
– This will receive the information located in the “Unit Info” section panel located on the left
hand side of the tab page. The project ID is excluded from being read when this is selected. The project
ID will be sent/read when the application data is transferred.
CAN Configuration
– This data includes the Source Address, Protocol, Baud Rate, Identifier and
Terminating Resistor setting on the CAN Configuration tab.
Application Data
– For transmitters, this includes information from the Input Configuration tab, Feedback
Configuration tab, and the project ID. For receivers, the transfer includes the project ID and Programming
data.
5.3.2 Receiving Device Configuration
To read a program file from a device:
1. Plug in the USB programming cable or position.
NOTE: Reference the specific device manual for details on connecting the USB cable.
2. Click “Receive” and follow the on-screen prompts.
3. RCP will confirm reception and automatically display current programming in the unit.
Unit Info
– This will receive the information located in the “Unit Info” section panel located on the left
hand side of the tab page. The project ID is excluded from being read when this is selected. The project
ID will be sent/read when the application data is transferred.
CAN Configuration
– This data includes the source address, protocol, baud rate, identifier and
terminating resistor setting on the CAN Configuration tab.
Application Data
– For transmitters, this includes information from the Input Configuration tab, Feedback
Configuration tab, and the project ID. For receivers, the transfer includes the project ID and programming
data.
5.3.3 Resetting the Device to Factory Default Settings
Resetting to factory defaults will set the device configuration back to the original factory settings. This
feature is only available for programs that are written by the factory.
1. Plug in the USB programming cable or position.
NOTE: Reference the specific device manual for details on connecting the USB cable.
2. Select the “Reset to Defaults” button.
Содержание RCP
