![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075057.webp)
RCP User’s Guide
July 2017
Page 57 of 110
9.1.4.7 Matrix
Channel
Description:
Makes configuring relays simpler by grouping them and allowing them to be driven via input
without the need for additional math channels.
Value Size:
- Input: (1-12) 1-bit values
- Input: (2) 8-bit values
- Output: (1-12) 1-bit outputs
Supported Input Connection Types:
IO (input), Math, Pin (CAN parameter in), RF Command (in), RF
Digital Bits (in), Constant, Scaling, Analog To Step
Supported Devices:
in
tele
Smart2
9.1.4.8
Math Operator Channel
Description:
Performs math operation on an input or number of inputs. The available math operator
channels are Greater Than, Greater Than Or Equal To, Less Than, Less Than Or Equal To, Not Equal,
Equals, Addition, Subtraction, Multiplication, Division, NOT, AND, OR, XOR. All of the relational
operators output a 1 bit value while all other operators will output a 16-bit value.
Value Size:
16 bits
Supported Input Connection Types:
IO (input), Math, CAN (Parameter in), RF Command (in), RF
Digital Bits (in), Constant, Scaling
Supported Devices:
MHR, MHC, in
tele
Smart2, CAN-2
9.1.4.9
CAN Parameter Group (Input) Channel
Description:
There are two types of PG Input channels, J1939 PG In and Generic PG In. One is used for
J1939 CAN messages and the other can be used for all other CAN message protocols. This channel type
then needs to connect to parameter input channels (Param In), which will provide access to the data
within the CAN message.
Value Size:
64 bits (8 bytes of CAN Data)
Supported Input Connection Types:
Message directly coming in from the CAN bus
Supported Devices:
MHR, MHC, in
tele
Smart2, CAN-2
9.1.4.10 CAN Parameter Group (Output) Channel
Description:
There are two types of PG Output channels, J1939 PG Out and Generic PG Out. -One is
used for J1939 CAN messages and the other can be used for all other CAN message protocols. -This
channel type configures the header information for the CAN message before transmission.
Value Size:
64 bits (8 bytes of CAN Data)
Supported Input Connection Types:
Param Out
Supported Devices:
MHR, MHC, in
tele
Smart2, CAN-2
9.1.4.11 CAN Parameter (Input) Channel
Description:
Used to parse data from an incoming CAN message.
Value Size:
1-8 bits (selectable through property)
Supported Input Connection Types:
J1939 PG In, Generic PG In
Supported Devices:
MHR, MHC, in
tele
Smart2, CAN-2
9.1.4.12 CAN Parameter (Output) Channel
Description:
Used to capture/format data for an outgoing CAN message.
Value Size:
1-8 bits (configured through property)
Supported Input Connection Types:
IO (Input), Math, CAN (Parameter In), Constant, RF Command,
RF Command Digital Byte Bits (In), Scaling
Supported Devices:
MHR, MHC, in
tele
Smart2, CAN-2
Содержание RCP
