![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075096.webp)
RCP User’s Guide
July 2017
Page 96 of 110
9.3.4 Multi-Input Mode using the Matrix Channel
This section will show how to use the Matrix Channel in Multi-Input Mode.
Start by creating a new project with an in
tele
Smart2 device selected and allow the device configuration to
be read. This is the same process explained in Section 5. Once the project is started, navigate to the
Programming tab across the bottom of the UI. From the I/O tab add a Matrix Channel to the workspace.
Changing the Input Mode of the channel
changes the Matrix Channel display. This mode
allows individual channels to drive each of the
speed points defined.
Changing the Input Mode enables the
corresponding input properties. The number of
enabled inputs is based on the number of
speed points selected.
Содержание RCP
