![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075013.webp)
RCP User’s Guide
July 2017
Page 13 of 110
After selecting the device type, the user then has the ability to give the device a name. The device name
is solely used within RCP to help denote different devices within a project. Certain devices support the
ability to receive the device data upon being added to the project. If a device does not support this, then
the option will be greyed out.
A project can be created either with the device connected or without a device connected. If a project is
created with a device connected, RCP will read all of the configuration information from the device when
the project is created so long as the “Receive Device Data” box is checked. Having this box checked and
the device connected is recommended as it gives the user a starting point with configuration. If the user
chooses not to receive the device data or there is no device connected, then the current device
configuration is unknown by the program. The user MUST be aware of this as certain device configuration
parameters could be overwritten by the program defaults when the programming is “sent” to the device.
This could mean that parameters such as the access code and RF channel are changed and a
transmitter and receiver originally intended to communicate with each other will no longer communicate.
CAUTION
ALWAYS BE AWARE OF THE CONFIGURATION OF A DEVICE. NOT HAVING THE LATEST CONFIGURATION
HAS THE POTENTIAL TO PREVENT DEVICES INTENDED TO COMMUNICATE TOGETHER FROM BEING ABLE
TO COMMUNICATE.
Select device type.
The device name (editable by user).
If checked, RCP will read the
configuration from the device
(checked by default).
Click to add device to project.
Содержание RCP
