![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075101.webp)
RCP User’s Guide
July 2017
Page 101 of 110
Crane Configuration Properties
Description
Pendant Operation
This is
only
used for
3-speed
receiver applications to allow a
JLTX, SLTX or older style 10K 3-speed pendant to be used.
Activating this switch will prevent a 3-speed
tele
Pendant from
working properly on the receiver. This does not apply to 2-Speed
applications.
Active ESTOP
This feature causes the receiver to shut down if the transmitter is
out of range. For this to work the companion transmitter must
have this feature also. Please check the appropriate transmitter
manual to see if your transmitter has this capability. All
intele
Smart receivers have this feature; both the receiver and the
transmitter must have this box checked. DO NOT use this
feature with non-equipped transmitters. It is not recommended to
have multiple systems in the same area (600 feet) on the same
frequency/channel if active ESTOP is used, due to the additional
frequency/channel loading. Check the active ESTOP box if this
feature is desired.
Figure 43: Generating Pre-configured Mapping
Click this button to generate a mapping. A
mapping will be available on the Programming
page based on the Pre‐Configured crane type
selected.
Содержание RCP
