![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075104.webp)
RCP User’s Guide
July 2017
Page 104 of 110
Figure 50: Configure 12 Relays Using Various Input Methods to Drive the Relays
9.3.8 RF Masking
The CAN-2, MHR, and in
tele
Smart2 receivers support RF masking. This feature allows the receiver to
come online even if the RF Command is active. This property is available on either RFCmd or RFDigBit
channels.
Figure 51: Channels That Support Check On Start
Figure 52: Property to Check or Ignore During Start Sequence
9.3.9 Analog to Digital Dead-band Adjustment
The Analog to Digital Dead-band Adjustment channel is available on the devices that support mapping.
This channel allows the user to manipulate data so that a specific dead-band range can be dialed in and
used to drive an output. The following diagram shows how to drive a digital and an analog type output
using the dead-band channel. This approach allows the processing to occur prior to output and can be
applied to more output types.
Содержание RCP
