![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075027.webp)
RCP User’s Guide
July 2017
Page 27 of 110
NOTE: Transmitters with a display can enter IR communication mode through the menu interface on the
device. Transmitters without a display must enter IR config receiver mode
.
These procedures can be referenced in the product-specific transmitter manual. Once the device has
been placed in this mode RCP can then start to communicate with the device.
NOTE: Make sure that the IR adapter and the device’s IR window are lined up. Do not move the IR
adapter when communication is occurring as this may cause errors in RCP.
7.2 Input Configuration
The input configuration feature gives the user the ability to enable and configure the inputs of a
transmitter though the RCP user interface.
NOTE: The screen images are taken from an XLTX demonstration unless noted otherwise.
The input configuration feature is supported on the following transmitters:
CHTX
XLTX
MLTX2
PGT
MBT
Mini-PGT
Mini-MBT
Flex VUE
The input configuration screen is divided into three sections:
1. Digitals (Toggles/Push Buttons/Rotary Switches)
2. Motions (Joysticks/Paddles)
3. Analogs (Analog Inputs/Potentiometers)
Содержание RCP
