![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075017.webp)
RCP User’s Guide
July 2017
Page 17 of 110
Click “Open Hex File” (which will open an Open File Dialog window).
o
Navigate to the appropriate folder and select the firmware file to load on the device.
o
The text area will show that the file has been loaded.
Click “Program Device.”
o
The text area will display the status of the firmware load and display a message stating
that the firmware has been completed.
o
The device firmware is verified during the programming step.
Once the firmware has been programmed, the device can be reset by clicking on “Reset Device”
to run the newly loaded firmware.
WARNING
IF POWER IS LOST TO THE DEVICE DURING PROGRAMMING OR IF PROGRAMMING IS INTERRUPTED,
POWER CYCLE THE DEVICE BEFORE ATTEMPTING PROGRAMMING AGAIN.
WARNING
ADDING OR REMOVING A USB DEVICE DURING PROGRAMMING WILL CAUSE THE PROGRAMMING TO FAIL.
5.2.3 RCP Options
Figure 2: Select Tools->Options to Launch the RCP Options Dialog
RCP logging configuration from the Options dialog.
Verbose
: Log more data than usually logged.
Maximum file size (MB)
: The size the log file is allowed to get to before it is saved and a new file is
started.
Number of files
: The total number of log files saved. This includes the active log file. The oldest file(s)
will be deleted.
Содержание RCP
