![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075047.webp)
RCP User’s Guide
July 2017
Page 47 of 110
Copy Selected
: Creates a copy of the channel type that was clicked. No data is copied to the new
channel, just the type of channel.
After the copy is complete the newly created items are selected so they can be moved around as a group.
If multiple channels are selected then the “Copy Selected” action would copy the selected block of
channels, and the “Delete Selected” action would remove the selected block from the workspace.
Align Selected
: Aligns the channels to the left most channels in the group of selected channels. In the
diagrams below the lower two channels would shift left and be vertically aligned with the top channel. This
menu item is disabled unless there are multiple channels selected.
Figure 11: Prior to Alignment
Figure 12: After Alignment
Delete Connection
: Clicking this menu item deletes the input connection coming in the left-hand side of
the channel.
Connect to
: Connects the selected channel to the input side of the channel. Not all channels support
right-click connection completion.
Figure 13: Right-click Connection Options
8.2.3.1 Hot
Key
Sequences
Key Combination
Description
Crtl+C
Copy selected channel(s) in the workspace.
Ctrl+X
Delete selected channel(s) in the workspace.
Ctrl+A
Vertically align the selected channels in the workspace.
Ctrl+Shift+A
Automatically moves any channels that have a negative x-y
coordinate to zero. This can occur if the channel group is
Shifted Left
Shifted Left
Delete Connection
Click a menu item to
connect to that device.
Содержание RCP
