![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075029.webp)
RCP User’s Guide
July 2017
Page 29 of 110
For digitals, the user has the ability to configure these parameters of the input:
Configured
– Determines if the input is configured and enabled in the device.
Generic Input Name
– The name that shows up if the user does not enter text into the Input
Name cell. This name cannot be changed by the user.
Input Name
– The user-defined name that will display on the LCD when the input is active.
Display Line Min
– The minimum line on the display that the text will be shown.
Display Line Max
– The maximum line on the display that the text will be shown.
Priority
– The input priority for the display line. For example, if you have configured two inputs to
be displayed on the same line, you can configure which input has priority. The input with the
lower priority will bump to the next line based on the min and max display line values. Feedback
also affects which line the text will be displayed on. The feedback priority has the natural priority
over any configured inputs. This means that if you configure feedback and an input to display on
the same line and having the same priority, the feedback string will be displayed over the input. If
the input is configured to have a range using the min and max display line values then the input
will be bumped to the next available line in the range.
Power On Check
– Allows the user to configure the expected state of the input at power on (0, 1,
Don’t Care). If the state of the input during initialization is not as set, then the device will shut
down during initialization with an error.
Runtime Check
– If this is checked, the system checks the state of the input during runtime and
if it changes the device shuts down.
7.2.2 Motions
Motion inputs are configured using the motions panel. Each of the rows configures a motion pair. Each
motion pair is made up of two directions. There are separate columns for entering the text for each of the
directions.
The “Generic Input Name” or “Direction 1 Name/ Direction 2 Name” will be shown on the device’s LCD
display with a value of 0-100% depending upon how far the input motion is engaged. For example: Motion
1 Dir 1 100%.
The defined directions for the x-axis on the dual axis joysticks are: Direction 1 will be to the right and
direction 2 to the left.
For motions, the user has the ability to configure these parameters of the input:
Configured
– Determines if the input is configured and enabled in the device.
Generic Input Name
– The name that shows up if the user does not enter text into the Input
Name cell. This name cannot be changed by the user.
Direction 1 Name
– The user-defined name that will display on the LCD when the input is active
in direction 1.
Direction 2 Name
– The user-defined name that will display on the LCD when the input is active
in direction 2.
Display Line Min
– The minimum line on the display that the text will be shown.
Display Line Max
– The maximum line on the display that the text will be shown.
Priority
– The input priority for the display line. For example, if you have configured two inputs to
be displayed on the same line, you can configure which input has priority. The input with the
Содержание RCP
