![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075056.webp)
RCP User’s Guide
July 2017
Page 56 of 110
9.1.4.1
Analog Input Channel
Description:
The analog input channel is used to measure an analog value and convert it into a digital
value that can be used as input to other channels. Refer to the product manual for each device to
determine what types of analog inputs are supported.
Value Size:
10 bits
Supported Input Connection Types:
Mapped to physical hardware
Supported Devices:
MHR, MHC, in
tele
Smart2
9.1.4.2 Digital
Input
Channel
Description:
The digital input channel is used to determine if there is a voltage on an input pin. If there is
a voltage present, the digital input will be high; otherwise, the input will be low. The value can then be
used as input to other channels.
Value Size:
1 bit
Supported Input Connection Types:
Mapped to physical hardware
Supported Devices:
MHR, MHC, in
tele
Smart2
9.1.4.3 Event
Channel
Description:
The event channel is used to map a system event. The value can then be used as input to
other channels.
Value Size:
1 bit
Supported Input Connection Types:
Maps to power on and transmitter ESTOP
Supported Devices:
in
tele
Smart2
9.1.4.4
Digital Output Channel
Description:
The digital output channel is used to set the voltage level on the output connection
configured by the channel properties.
Value Size:
10 bits (MHR/MHC) (any value greater than 0 will be represented as digital high); 1 bit
(in
tele
Smart2 and CAN-2)
Supported Input Connection Types:
IO (input), Math, Pin (CAN parameter in), RF Command (in), RF
Digital Bits (in), Constant, Scaling
Supported Devices:
MHR, MHC, in
tele
Smart2, CAN-2
9.1.4.5
PWM Output Channel
Description:
These channels will output a PWM signal that is either open loop PWM or current
compensated PWM (closed loop). The PWM frequency is set in the Unit Info screen. -Refer to Section 8
for additional information on how to set this.
To set this output type, select the I/O channel type and choose one of the PWM output types.
Value Size:
10 bits
Supported Input Connection Types:
IO (input), Math, Pin (CAN parameter in), RF Command (in), RF
Digital Bits (in), Constant, Scaling
Supported Devices:
MHR, MHC
9.1.4.6
Analog To Step Channel
Description:
Converts an 8-bit analog value (0-255) into a discrete step value used as input to a matrix
channel. This is typically used to convert analog RF command values from a proportional transmitter into
values that make it look like a transmitter sending discrete step values.
Value Size:
8 bit
Supported Input Connection Types:
Math, Constant, RFIn, RF Dig In
Supported Devices:
in
tele
Smart2
Содержание RCP
