![background image](http://html1.mh-extra.com/html/magnetek/rcp/rcp_user-manual_3581075019.webp)
RCP User’s Guide
July 2017
Page 19 of 110
5.2.5 Removing Control Characters from the Project File
The versions of RCP greater than 2.x will prevent control characters from being written to the project file.
A control character is a non-printable character that is not represented with a written symbol. This feature
can be used if for some reason the RCD project file contains control characters. If the project file contains
control characters, RCP will display an error when trying to open the project file. If this occurs, run this on
the project file to remove the characters, and then reopen the project file; it will then load without error.
1. Select “Help -> Select RCD file to remove control characters.”
2. The user will be notified when removal is complete.
5.2.6 RCP Compatible Firmware
This opens a Windows Explorer window pointing to the latest RCP compatible firmware at the time of the
RCP release. This is the firmware that is loaded on the device to permit the programming of the device
via the RCP mapping functionality.
5.2.7 Reading the RCP Software Version
1. Select “Help -> About.”
2. The RCP software version number will be displayed.
Содержание RCP
