Task Force Tips BLITZFIRE Series Instruction For Operation And Maintenance Download

Page: 1 / 20

©Copyright Task Force Tips LLC 2002-2020

LIX-630 August 24, 2020 Rev21

TASK FORCE TIPS LLC

MADE IN USA · tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

INSTRUCTIONS FOR OPERATION AND MAINTENANCE

BLITZFIRE

Portable Monitor Series

DANGER

Understand manual before use. Operation of this device without understanding the manual and

receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/

serial-number.
This equipment is intended for use by trained and qualified emergency services personnel for

firefighting. All personnel using this equipment shall have completed a course of education

approved by the Authority Having Jurisdiction (AHJ).
This instruction manual is intended to familiarize firefighters and maintenance personnel with the

operation, servicing, and safety procedures associated with this product. This manual should be

kept available to all operating and maintenance personnel.

MAXIMUM OPERATION PRESSURE

175 PSI (12 bar)

MAXIMUM FLOW

500 GPM (2000 l/min)

HYDROSTATIC PROOF TEST

900 PSI (62 BAR) per NFPA 1964

BLITZFIRE MONITOR

HIGH ELEVATION

BLITZFIRE MONITOR

BLITZFIRE

OSCILLATING MONITOR

HIGH ELEVATION BLITZFIRE

OSCILLATING MONITOR

Summary of Contents for BLITZFIRE Series





















Search results

Summary of Contents for BLITZFIRE Series

Reviews:

Related manuals for BLITZFIRE Series

Brands by name

Popular brands

Task Force Tips BLITZFIRE Series, Instruction For Operation And Maintenance

Search results

Summary of Contents for BLITZFIRE Series

Reviews:

Related manuals for BLITZFIRE Series

Brands by name

Popular brands