Mackie 8-BUS Series, Руководство пользователя

Страница: 132 / 247

6-55
O w n e r ’ s M a n u a l
Starting a New Session
Selecting Internal Effects
TO SELECT INTERNAL EFFECTS
From the console:
1. Select the Aux Send in the V-Pot Select
Section corresponding to the effect pro-
cessor you want to use.
2. Press the PLUG-INS button and the ON
button in the Fat Channel Section.
3. Press the EFFECTS button to select
Fader Bank 3. Adjust the correspond-
ing FX Return fader to add the effect to
the L-R buses. Start at unity gain; you
will be returning to this bank often to
adjust the “wet” return.
4. Select the effect you want to use with
the first V-Pot in the Fat Channel Sec-
tion, and adjust the effect’s parameters
as desired.
5. Adjust the Aux level V-Pots on the
channels you want to send to the
selected effect.
6. Turn the Master Aux level V-Pot to ad-
just the overall aux send level to the
selected effect. You can press the SOLO
button in the Master V-Pot Section to
monitor the aux send signal, Pre-FX.
ON
LOW PREVIOUS
SELECT
LOW MID HI MID
EQ COMPRESSOR GATE PLUG-INS LOAD PATCH SAVE PATCH
SETUP MEMORY A MEMORY B
HI NEXT
SELECT SELECT SELECT HELP
SUPER CD ENCODING
AUX 7 AUX 8
AUX 5 AUX 6
AUX 1
AUX 3
AUX 2
AUX 4
LEVEL TO TAPE DIGITAL TRIM
1-24 1-48
12
36
SELECT
MASTER
PAN
SOLO
AUX 9
-
10
AUX 11
-
12
PAN PAN
ON
LOW PREVIOUS
SELECT
LOW MID HI MID
EQ
COMPRESSOR GATE
PLUG-INS
LOAD PATCH
SAVE PATCH
SETUP MEMORY A MEMORY B
HI NEXT
SELECT SELECT SELECT HELP
SUPER CD ENCODING
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
A u x 1 ( S T A N D A R D E F F E C T S ) >
R e v e r b V e r s i o n 1 . 0
SHIFT MASTERS
1 - 24
25 - 48
49 - 72
(TRACK) (MONITOR)
BANK SELECT
EFFECTS
MIC/LINE TAPE IN