manualshive.com logo in svg

Mackie 8-BUS Series, Руководство пользователя

"Серия Mackie 8-BUS - это профессиональные микшерные консоли высокого качества. Для получения сервисной инструкции пользовательского руководства бесплатно, загрузите его с {веб-сайта}. Этот мануал поможет вам освоить все возможности вашего устройства и улучшить свой звук."

Поделиться
Скачать
background image

1-3

Introduction

O w n e r ’ s  M a n u a l

Digital 8•Bus Unique Features

The Digital 8•Bus has a number of unique

features that distinguish it from other
affordable digital consoles. Here’s a short
rundown.

D8B Console

V-Pots™

V-Pot is short for “Virtual Potentiometer.” It

is similar to, but uniquely different from, the
rotary pots found on analog mixers. A V-Pot
rotates continuously, without physical stops.
Because it is actually an infinitely variable
digital controller, it can emulate any analog
“knob” function, and you can change its
function at the push of a button. The relative
position of the V-Pot is represented by a ring of
LEDs around the V-Pot. Depending on the
function of the V-Pot, the actual values may be
displayed in the vacuum fluorescent display
(VFD) located in the upper-right corner of the
console, in the meter bridge, or on an optional
SVGA monitor. The V-Pots in each channel
strip represent Aux Send 1–12 levels, Send To
Tape levels, Digital Trim levels, and Pan
settings. The Fat Channel’s V-Pots represent
the EQ, compression, gate, and internal effects
settings for each selected channel.

Fat Channel

Yes, Fat Channel. Instead of 24 vertical

channel strips, each with an assortment of
analog rotary pots, the D8B’s Fat Channel is
made up of four V-Pots, laid out horizontally
underneath the VFD. All digital signal
processing is controlled from there. Select the
channel you want to work with, then use the
Fat Channel V-Pots to set EQ, compression,
gate, and internal stereo effects for that
channel. This knob-saving marvel is one reason
the Digital 8•Bus has such a small footprint.

Because we’re in the digital domain, and

because Mackie’s job is to make you more
creative, we’ve set up the Fat Channel with
two memories per channel. You can store and
easily recall one of two different groups of EQ/
compression/gate settings, either manually or
via real-time dynamic automation. You can also
use this feature to compare two different
settings and determine which sounds best.

The Fat Channel also contains a Library for

storing frequently used EQ and internal effects
settings, which can be recalled and used by any
channel.

DSP Plug-ins

The Digital 8•Bus has a built-in board with

two digital effects processors, and card-cage
slots for adding up to three more DSP effects
boards. Each board contains two digital effect
processors, for a total of eight internal digital
effects (which can run simultaneously). The
D8B comes with the Mackie Standard Effects
package and the IVL

™

 Vocal Studio. Optional

software packages from Mackie and third-party
plug-ins from your favorite digital effects
manufacturers designed specifically for the
Digital 8•Bus are on the way.

Motorized 100mm Faders

All 25 faders are motorized, allowing you to

see what’s happening when you’re in automation
mode. When you recall a scene, the faders
automatically move to their stored positions. In
Touch mode, you can grab a moving fader on the
fly and update a move automatically. If you
choose, the fader motors can be globally shut off
with the push of a button.

Automation

The Digital 8•Bus has Mackie Real Time OS

Automation software built-in. This powerful
automation engine provides a method of
storing fader moves, pans, EQ changes, and
mutes, all synced to time code for dynamic
automation. In addition, it can store and recall
up to 100 snapshots of fader, EQ, effects, pan,
and mute parameters (and an unlimited
number of snapshots when using the optional
screen/keyboard/mouse combination).

The Remote CPU

Built-in Hard Drive and Floppy Drive

All automation information is stored on the

internal hard drive, and you can back up the
information on 3.5" floppy disks with the built-
in floppy drive.

SVGA Monitor, Keyboard and Mouse

These items are optional, but can greatly

enhance the operation of the Digital 8•Bus.
Since a monitor, keyboard, and mouse are
natural extensions of a computer, you might
feel more comfortable using them to perform
the more computer-like functions built into the
console, like saving files, cutting/pasting/
copying, etc.

Содержание 8-BUS Series
























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 8-BUS Series

Amersham Pharmacia Biotech M-925 Instructions Manual preview
M-925
Бренд: Amersham Pharmacia Biotech Страницы: 8
Aries AR323 Assembly Instructions Manual preview
AR323
Бренд: Aries Страницы: 8
Nady Audio SPM-4250 Owner'S Manual preview
SPM-4250
Бренд: Nady Audio Страницы: 12
Belle Minimix 150 Operator'S Manual preview
Minimix 150
Бренд: Belle Страницы: 24
Belle MINIMIX 130 Operator'S Manual preview
MINIMIX 130
Бренд: Belle Страницы: 44
LOUD Technologies 1202VLZ4 Quick Start Manual preview
1202VLZ4
Бренд: LOUD Technologies Страницы: 16
GMC GPM1600 Original Instructions Manual preview
GPM1600
Бренд: GMC Страницы: 40
Sencor SHM 5330 User Manual preview
SHM 5330
Бренд: Sencor Страницы: 10
Work Pro PA 9500 CDT Series User Manual preview
PA 9500 CDT Series
Бренд: Work Pro Страницы: 20
Brentwood HM-48B Operating And Safety Instructions Manual preview
HM-48B
Бренд: Brentwood Страницы: 16
J. W. Davis & Company DMC-16 User Manual preview
DMC-16
Бренд: J. W. Davis & Company Страницы: 16
Cuisinart RHM100E Manual preview
RHM100E
Бренд: Cuisinart Страницы: 71
BOMANN UM 1354 CB Instruction Manual preview
UM 1354 CB
Бренд: BOMANN Страницы: 58
Yamaha DM3 Owner'S Manual preview
DM3
Бренд: Yamaha Страницы: 24
Ibiza sound DJM150BT-VHF User Manual preview
DJM150BT-VHF
Бренд: Ibiza sound Страницы: 37
Farberware FDM300 Use And Care Instruction preview
FDM300
Бренд: Farberware Страницы: 8
Kapriol KME 1600 Manual preview
KME 1600
Бренд: Kapriol Страницы: 36
Hamilton Beach 62630 Manual preview
62630
Бренд: Hamilton Beach Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды